Chat with the Elektron Analog Rytm MKII Manual
Get instant answers about your Elektron Elektron Analog Rytm MKII. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Elektron Analog Rytm MKII Manual
Common Elektron Analog Rytm MKII Questions
How do I sync the Analog Rytm MKII to other MIDI devices, like a sequencer or DAW?
Go to Global > MIDI Config > Sync and set 'Clock Receive' and 'Transport Receive' to ON. Ensure your DAW or sequencer is sending MIDI clock and transport messages on the correct MIDI channel (also configured in the Global MIDI settings).
What's the difference between saving a Pattern, a Kit, and a Sound on the Analog Rytm MKII, and how do I manage them?
Patterns store the sequencer data; Kits store the sound settings for all tracks in a Pattern; Sounds are individual instrument patches. Use the Sound Browser (FUNC + SOUND) to save and manage sounds; the Pattern menu (FUNC + PATTERN) to save patterns; and the Kit menu (FUNC + KIT) to manage kits.
How do I quickly clear a pattern or track on the Analog Rytm MKII?
To clear a pattern, press [FUNC] + [REC] (or [STOP] if you're not recording). To clear a track, hold [TRACK] + [REC] and then press the track button you want to clear.
I'm not hearing any audio from the Analog Rytm MKII, what should I check?
First, verify that the main volume knob is turned up, and that individual track volumes aren't muted. Also, double-check your audio output connections and that the correct output is selected in the Global settings (Audio Routing).
How do I use Performance Mode and what parameters can I control?
Enter Performance Mode by pressing [PERFORM]. Performance Mode allows you to simultaneously adjust multiple parameters across all tracks using the performance knobs; parameters are assigned on the Performance Setup page (FUNC + PERFORM).