Chat with the TASCAM US-16x08 USB Audio Interface Manual
Get instant answers about your TASCAM TASCAM US-16x08 USB Audio Interface. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with TASCAM US-16x08 USB Audio Interface Manual
Common TASCAM US-16x08 USB Audio Interface Questions
How do I connect and configure my MIDI keyboard with the US-16x08 to record MIDI data into my DAW?
Connect your MIDI keyboard to the MIDI IN port on the back of the US-16x08. In your DAW, select the US-16x08 as your MIDI input device and enable the corresponding MIDI input channel for recording.
Does the US-16x08 have onboard memory for saving mixer settings or custom input configurations?
No, the US-16x08 does not have onboard memory for storing mixer settings. You'll need to save your mixer settings as project files within your DAW.
What's the easiest way to monitor my inputs directly through the US-16x08 without latency while recording?
Use the 'Monitor' knob on the front panel to blend the direct input signal with the audio coming from your DAW. Start with the knob fully clockwise to hear only direct input monitoring.
My computer isn't recognizing the US-16x08, even after installing the drivers. What should I do?
First, ensure the US-16x08 is powered on and properly connected to your computer via USB. Try using a different USB cable and/or USB port. Also, make sure you've downloaded and installed the latest drivers from the TASCAM website and restart your computer.
What is the 'Low Cut' feature on each input channel of the US-16x08, and when should I use it?
The 'Low Cut' switch activates a high-pass filter, attenuating low frequencies below 80Hz to reduce unwanted rumble, mic pops, or other low-frequency noise on each channel.