Chat with the Focusrite Scarlett 18i20 3rd Gen USB Audio Interface Manual
Get instant answers about your Focusrite Focusrite Scarlett 18i20 3rd Gen USB Audio Interface. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Focusrite Scarlett 18i20 3rd Gen USB Audio Interface Manual
Common Focusrite Scarlett 18i20 3rd Gen USB Audio Interface Questions
How do I connect and configure MIDI devices to the Scarlett 18i20 3rd Gen for recording or controlling virtual instruments?
Connect your MIDI device to the MIDI In/Out ports on the back of the interface. In your DAW, select the Scarlett 18i20 as your MIDI input and output device to establish communication and allow for recording or sending MIDI data.
Can I save and recall custom routing configurations or 'presets' within the Scarlett 18i20's software mixer?
Yes, the Focusrite Control software allows you to save and load custom routing configurations as presets, allowing you to quickly switch between different recording or monitoring setups.
What are the main functions of the front panel controls on the Scarlett 18i20 3rd Gen, and how do I use them effectively?
The front panel provides input gain controls for channels 1-2 (with INST/LINE switches and AIR mode buttons), headphone volume controls, and a main monitor level knob; use these to adjust input levels, monitor volume, and engage the AIR effect to brighten the signal.
My Scarlett 18i20 is recognized by my computer, but I'm not getting any audio input or output. What are some common troubleshooting steps?
First, ensure the Scarlett 18i20 is selected as your default audio device in your computer's sound settings and within your DAW; secondly, check that the correct inputs and outputs are routed in Focusrite Control and your DAW session.
What is 'Air' mode on the Scarlett 18i20 3rd Gen, and when should I use it?
Air mode emulates the sonic characteristics of a classic Focusrite ISA console preamp by adding subtle high-frequency boost; it's best used on vocals and acoustic instruments when you want to add clarity and a more 'open' sound.