Chat with the opsix SE Manual
Get instant answers about your Korg opsix SE. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with opsix SE Manual
Common opsix SE Questions
How do I sync the opsix SE's internal sequencer to an external MIDI clock?
In the Global Settings menu, set the MIDI Clock Source to "External." Ensure your external device is sending MIDI Clock messages on the correct MIDI channel, and that the opsix SE is set to receive on that channel as well.
How do I save my custom sound creations (operators, effects, etc.) as a User Program and recall them later?
After creating your sound, press the "Write" button, select a User Program slot, and press "Write" again to confirm. You can then select the saved Program by using the Program Select knob and pressing it to load.
The LED indicators on the Operators are flashing rapidly and no sound is produced. What does this mean and how do I fix it?
This usually indicates an Operator is outputting a very high amplitude, potentially causing distortion or clipping. Reduce the output level of the offending Operator, or adjust the Algorithm structure to reduce the overall signal level, or use the master volume control.
How do I use the enhanced polyphony offered by the opsix SE to create thicker, layered sounds?
The opsix SE allows for up to 8 stereo voices. Utilize the Unison mode and detune parameters within the voicing settings to create richer, layered textures by stacking multiple voices of the same sound.
What's the easiest way to create a simple loop with the opsix SE's built-in sequencer?
Press the "Record" button to engage recording, play your desired sequence on the keyboard, and then press "Record" again to stop. Adjust the loop length using the dedicated length knob/parameter in the sequencer settings, accessible via the "Edit" or "Sequencer" button.