Chat with the ARP ODYSSEY FS Manual
Get instant answers about your Korg ARP ODYSSEY FS. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
đŸ“–Chatting with ARP ODYSSEY FS Manual
Common ARP ODYSSEY FS Questions
How do I connect the ARP ODYSSEY FS to my computer via MIDI and ensure it's recognized by my DAW?
Connect a USB cable from the ODYSSEY FS to your computer. Ensure your DAW's MIDI settings recognize the ODYSSEY FS as an input and output device, and set the MIDI channel on the ODYSSEY FS to match your DAW's settings using the Global Parameter controls.
Can I save custom patches on the ARP ODYSSEY FS, and if so, how?
The ARP ODYSSEY FS doesn't have traditional patch memory. Instead, save your panel settings by taking a photo or noting the knob positions on a patch sheet for later recall. Note that the sequencer does allow storing patterns.
I'm new to the ARP ODYSSEY FS. What's a good starting point for creating a basic sound?
Start by selecting a single oscillator (Oscillator 1 or 2), adjusting its waveform (sawtooth or square), setting the filter cutoff frequency and resonance, and then tweaking the ADSR envelope to shape the sound’s attack, decay, sustain, and release.
The ARP ODYSSEY FS isn't producing any sound. What are the first things I should check?
First, ensure the power switch is on, the volume knob is turned up, and the VCA (Voltage Controlled Amplifier) is open either manually or via the envelope. Also, check that the oscillator is enabled and the keyboard is triggering the VCA or filter.
How does the Drive switch on the ARP ODYSSEY FS affect the sound?
The Drive switch introduces a saturation effect to the output signal, adding harmonic richness and a more aggressive, overdriven tone, which is particularly noticeable on sawtooth and square waveforms.