Chat with the Korg Volca FM Manual
Get instant answers about your Korg Korg Volca FM. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Korg Volca FM Manual
Common Korg Volca FM Questions
How do I sync the Volca FM to my DAW or other MIDI devices?
Set the Volca FM's MIDI channel to match your DAW's output channel and connect the MIDI OUT of your interface to the Volca FM's MIDI IN. The Volca FM receives MIDI clock, so set your DAW to send MIDI clock and enable external sync on the Volca FM using the GLOBAL settings.
How do I save and load patterns on the Volca FM?
Press 'MEMORY' then use the 'FUNC' button and step keys 1-16 to select a memory location. Press 'REC' to save the current pattern. To load, press 'MEMORY' then select a memory location using the step keys. Press 'PLAY' to start playing the pattern.
How do I import DX7 SysEx patches into the Volca FM?
You'll need a MIDI interface and SysEx transfer software on your computer. Send the DX7 SysEx data to the Volca FM via MIDI; the Volca FM will automatically store it in its memory banks (starting from the currently selected patch number).
My Volca FM is making strange noises or not responding. What can I do?
First, try a factory reset by holding 'FUNC' and powering on the unit. If that doesn't work, check your MIDI connections and ensure you're not sending conflicting MIDI data or overloading the unit's memory with corrupt SysEx data.
How do I use the Volca FM's CHORUS effect and what are its limitations?
The CHORUS effect is enabled globally through the GLOBAL settings menu (accessed by holding FUNC while powering on). While enabled it applies to the entire unit. Note that the chorus is a simple on/off effect, with no adjustable parameters beyond a pre-set depth.