Chat with the Korg Monologue Manual
Get instant answers about your Korg Korg Monologue. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Korg Monologue Manual
Common Korg Monologue Questions
How do I sync the Monologue to other gear using MIDI clock?
Set the Monologue's Global Parameter 'Clock Source' to 'Auto' or 'MIDI' so it responds to incoming MIDI clock, and ensure your master device is sending MIDI clock signals. The Monologue can then act as a slave to the external sequencer or clock source.
How do I save and recall my custom patches (sounds) on the Monologue?
Press the 'Write' button, select a Program number (00-99), and press 'Write' again to save your patch; to recall a patch, simply select its Program number.
The oscilloscope display is showing a flat line and I'm not getting any sound. What's wrong?
Ensure the 'VCA Level' knob is turned up, and check if the 'Gate Mode' is set to 'Always On' inadvertently, which could be causing a constant tone, also check your volume output settings.
How do I create motion sequences using the Monologue's 16-step sequencer?
Engage 'Motion Sequence' recording by holding 'Rec', pressing one of the 16 step buttons, adjusting the desired parameter (e.g., filter cutoff), and then release 'Rec'; parameter changes will then be recorded for the corresponding step.
What is the microtuning feature on the Monologue, and how does it work?
The Monologue allows you to customize the scale and tuning of each key individually using the microtuning function; access it by holding 'Edit Mode' and using the keyboard to adjust the tuning of each note.