Chat with the multi/poly module Manual
Get instant answers about your Korg multi/poly module. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with multi/poly module Manual
Common multi/poly module Questions
How do I sync the Korg Module's internal sequencer to an external MIDI clock, and what MIDI CC does it use to start/stop playback?
In the Global Settings menu, set 'MIDI Clock Source' to 'External.' The Korg Module responds to standard MIDI Start (0xFA), Stop (0xFC), and Continue (0xFB) messages; no specific CC is used for start/stop beyond these standard messages.
How do I save my custom patches/presets on the Korg Module, and how many slots are available?
Press the 'Save' button, select a destination slot from the available 512 user preset locations across 4 banks (A-D), and confirm. Remember to also save your sequencer patterns independently in the Pattern Save section if you have edited those.
I'm new to the Korg Module. What's the quickest way to start creating a basic sequence from scratch?
Press the 'Sequencer' button, initialize a new pattern using the 'Clear Pattern' function, then use the step input buttons or real-time recording to enter notes, velocity, and modulation data. Remember to select a sound preset before recording.
Why am I not hearing any sound from the Korg Module, even though the level meters are active?
Ensure the 'Master Volume' knob is turned up, check that the 'Headphones/Line Out' switch on the rear panel is set to the correct output, and verify that your MIDI controller is transmitting on the correct MIDI channel (default is channel 1).
What are 'Performance Kits,' and how do they differ from regular presets on the Korg Module?
Performance Kits allow you to combine up to 4 different presets into a single multi-timbral performance, each on its own MIDI channel. This enables layered sounds or complex sequenced arrangements using the module's internal sequencer or external control.