Chat with the MS-20 FS Manual
Get instant answers about your Korg MS-20 FS. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with MS-20 FS Manual
Common MS-20 FS Questions
How do I connect the MS-20 FS to my computer and DAW for MIDI control?
Connect the MS-20 FS to your computer via USB. In your DAW, select the MS-20 FS as a MIDI input/output device and configure MIDI channels accordingly; the MS-20 FS transmits and receives on MIDI channel 1 by default, but this can be adjusted in the global settings.
Where does the MS-20 FS store patterns, presets, and kits, and how can I save/load them?
The MS-20 FS does not offer internal storage for patterns, presets, or kits. All settings are real-time adjustable via the front panel and are not saveable. Consider using a patch sheet or external controller memory to store your sound designs for recall.
What are the basic steps to create a simple sound and start experimenting with the MS-20 FS?
Start by setting the VCO waveform selectors to sawtooth or square. Then, adjust the cutoff frequency and resonance on the high-pass and low-pass filters, and experiment with modulating these filters using the envelope generators.
Why am I not getting any sound from the MS-20 FS, even though I have it connected and powered on?
Check the master volume knob on the front panel, ensure that the headphones or output jack are properly connected, and verify that the VCOs are enabled and producing a signal (indicated by their LED activity). Also confirm the filter cutoff is open enough for the signal to pass.
What's unique about the filter on the MS-20 FS compared to other synthesizers?
The MS-20 FS features a distinctive high-pass and low-pass filter combination known for its aggressive and resonant character. These filters self-oscillate at high resonance settings, producing a unique sound that's characteristic of the MS-20.