Chat with the minilogue bass Manual
Get instant answers about your Korg minilogue bass. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with minilogue bass Manual
Common minilogue bass Questions
How do I sync the minilogue bass to my DAW using MIDI for tempo and note input?
In the Global Settings, set MIDI Clock Source to 'External' and ensure your DAW is sending MIDI clock. Connect the minilogue bass to your computer via USB or a MIDI interface and configure your DAW to send MIDI notes to the Minilogue bass's MIDI channel (default is channel 1).
How do I save and recall my custom bass patches on the minilogue bass?
Press the 'Write' button, select the desired program number using the Program knob, and press 'Write' again to confirm. To recall, simply select the program number with the Program knob.
What do the 'Drive' and 'Sub-Oscillator' controls do on the minilogue bass, and how can I use them effectively?
The 'Drive' knob adds overdrive/distortion to the signal for aggressive tones, while the 'Sub-Oscillator' introduces a low-frequency square wave one or two octaves below Oscillator 1 for added thickness and weight; experiment with both subtly at first to avoid muddiness.
My minilogue bass isn't making any sound. What are some common things to check?
First, ensure the volume knob is turned up and the headphones aren't plugged in (mutes the main output); next, verify that the oscillator levels aren't set to zero, and finally, check that the VCA EG mode is not set to 'Gate' with no gate signal present.
How does the new 'Motion Sequencing' feature work on the minilogue bass, and how can I record parameter changes?
Enter record mode by holding 'Record' and pressing 'Play', then tweak the front panel knobs during sequence playback; up to four lanes of parameter automation can be stored per sequence to create evolving and dynamic basslines.