Chat with the Arturia MiniFuse 2 USB-C Audio Interface - White Manual
Get instant answers about your Arturia Arturia MiniFuse 2 USB-C Audio Interface - White. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Arturia MiniFuse 2 USB-C Audio Interface - White Manual
Common Arturia MiniFuse 2 USB-C Audio Interface - White Questions
How do I connect and configure my MIDI keyboard or controller to the MiniFuse 2 for use with my DAW?
Connect your MIDI device to the MiniFuse 2's MIDI input/output ports using standard MIDI cables. In your DAW's settings, select the 'Arturia MiniFuse 2' as your MIDI input and output device.
Can I save custom audio interface settings or routing configurations as presets within the MiniFuse 2?
No, the MiniFuse 2 doesn't offer onboard preset saving for interface settings. You'll need to save these configurations within your DAW project or through custom I/O setups.
How do I adjust the gain levels for my microphone and instrument inputs on the MiniFuse 2?
Use the gain knobs located on the front panel above each input. Adjust them until the signal meter shows a healthy level without clipping (reaching the red zone).
My microphone isn't being recognized, or the input level is very low. What troubleshooting steps should I take?
First, ensure the microphone is properly connected and the correct input is selected in your DAW. Verify that the 48V phantom power switch is engaged if using a condenser microphone, and that the gain knob is turned up sufficiently.
Does the Arturia MiniFuse 2 have a Loopback feature, and how do I use it to record audio from my computer?
Yes, the MiniFuse 2 features a Loopback function. Select the 'Loopback' input in your recording software to capture audio playing on your computer along with your microphone or instrument input signals.