Chat with the Arturia MiniFuse 2 USB-C Audio Interface - Black Manual
Get instant answers about your Arturia Arturia MiniFuse 2 USB-C Audio Interface - Black. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Arturia MiniFuse 2 USB-C Audio Interface - Black Manual
Common Arturia MiniFuse 2 USB-C Audio Interface - Black Questions
How do I connect and configure a MIDI keyboard with the MiniFuse 2?
Connect your MIDI keyboard to the 5-pin MIDI input on the back of the MiniFuse 2. Then, in your DAW, select the MiniFuse 2 as your MIDI input device to receive MIDI data from the keyboard.
How do I switch between direct monitoring (zero-latency) and DAW monitoring with the MiniFuse 2?
Use the 'Monitor Mix' knob on the front panel. Turn it fully left for direct input monitoring and fully right for monitoring the audio processed by your DAW.
I'm experiencing crackling or popping noises when recording or playing back audio. What should I do?
First, increase the buffer size in your DAW's audio settings. If the problem persists, try updating your MiniFuse 2 drivers from the Arturia website or checking your computer's CPU usage.
Does the MiniFuse 2 offer any built-in effects or processing, like a compressor or EQ?
No, the MiniFuse 2 is a transparent audio interface and does not include any built-in DSP effects. All processing must be done within your DAW using plugins.
I'm not getting any input signal when I plug my microphone into Input 1 or 2. What could be the problem?
Make sure the 'Gain' knob for that input is turned up and that the '48V' phantom power button is engaged if you are using a condenser microphone. Also verify that the correct input is selected in your recording software.