Chat with the Yamaha AG06 Mk2 6-channel Mixer and USB Audio Interface - White Manual
Get instant answers about your Yamaha Yamaha AG06 Mk2 6-channel Mixer and USB Audio Interface - White. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Yamaha AG06 Mk2 6-channel Mixer and USB Audio Interface - White Manual
Common Yamaha AG06 Mk2 6-channel Mixer and USB Audio Interface - White Questions
How do I configure the AG06 Mk2 to send or receive MIDI data from my DAW?
Connect the AG06 Mk2 to your computer via USB and ensure the AG06 Mk2 is selected as both the input and output MIDI device in your DAW's MIDI settings; channels 1-6 on the AG06 Mk2 correspond to individual tracks for MIDI input and output from your DAW.
Can I save custom EQ or compressor settings as presets on the AG06 Mk2?
No, the Yamaha AG06 Mk2 does not have a built-in preset saving function for EQ or compressor settings; you'll need to save these settings within your DAW project.
How do I mute the microphone input on the AG06 Mk2 while still hearing audio from my computer?
Use the mute button located directly above the channel 1 gain knob to quickly mute the microphone input; this will prevent the mic signal from going to the USB output or headphones/speakers, while still allowing you to hear playback from your computer.
Why is my microphone audio distorted or too quiet when using the AG06 Mk2?
Check the gain knob for channel 1 and ensure it's appropriately set, also make sure the PAD switch isn't engaged if your microphone signal is already weak; alternatively, if you are using a condenser microphone, ensure the +48V phantom power switch is engaged.
What is the 'Loopback' function on the AG06 Mk2 and how do I use it?
The Loopback function mixes all audio inputs (microphone, instruments, and computer audio) and sends them back to your computer via USB, which is useful for streaming or recording; engage the LOOPBACK button on the rear panel to activate this feature.