Chat with the Steiner-Parker Synthacon Manual
Get instant answers about your Steiner-Parker Steiner-Parker Synthacon. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Steiner-Parker Synthacon Manual
Common Steiner-Parker Synthacon Questions
Can I control my Steiner-Parker Synthacon with MIDI?
The original Synthacon does not have built-in MIDI. To control it via MIDI, you'll need to use a CV/Gate to MIDI converter like those made by Kenton or Doepfer to translate MIDI signals into control voltage for pitch and gate signals for note on/off.
How do I create and save patterns or presets on the Steiner-Parker Synthacon?
The Synthacon is an analog synthesizer with no digital memory; it does not have the ability to save or recall presets or sequences. You'll need to manually record knob positions, switch settings, and create patches each time.
What are the main sections of the Steiner-Parker Synthacon and how do they work together?
The Synthacon features a Voltage Controlled Oscillator (VCO), a multi-mode Voltage Controlled Filter (VCF) with Lowpass, Highpass, Bandpass, and Notch outputs, a Voltage Controlled Amplifier (VCA), and an ADSR envelope generator; these modules can be patched together using the onboard routing options to create a wide variety of sounds.
My Synthacon isn't making any sound, what are some common things to check?
First, ensure the power switch is on and the volume knob is turned up, then check that the VCO is producing a signal and the VCA is opened by the ADSR envelope; confirm all patch connections are secure and the keyboard is properly triggering the gate signal.
What makes the Steiner-Parker VCF unique, and how can I use its different modes?
The Steiner-Parker VCF is a multi-mode filter offering simultaneous Lowpass, Highpass, Bandpass, and Notch outputs, enabling complex filtering and unique sound shaping possibilities by routing different outputs to different destinations and using the unique timbre control.