Chat with the Solid State Logic SSL 12 USB Audio Interface Manual
Get instant answers about your Solid Solid State Logic SSL 12 USB Audio Interface. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Solid State Logic SSL 12 USB Audio Interface Manual
Common Solid State Logic SSL 12 USB Audio Interface Questions
How do I connect and configure MIDI devices with the SSL 12?
Connect your MIDI device to the MIDI In/Out ports on the rear panel. In your DAW, select the SSL 12 as your MIDI input/output device, and ensure MIDI channels are correctly configured for both the interface and your MIDI device.
Can I save custom channel strip settings or routing configurations as presets on the SSL 12?
The SSL 12 does not offer onboard preset saving for channel strips or routing. Configuration is managed within your DAW or using the SSL 360° software, saving session templates.
What's the basic workflow for recording audio with the SSL 12?
Connect your microphone or instrument to an input, adjust the gain using the front panel knobs, monitor the signal via the headphone or monitor outputs, and then record the audio track within your DAW, selecting the corresponding input on the SSL 12.
My audio is cutting out intermittently. What are some common causes and how can I fix it?
Audio dropouts can be due to incorrect buffer settings, insufficient CPU power, or faulty USB connection. Try increasing your DAW's buffer size, closing unnecessary applications, or using a different USB port/cable to resolve the issue.
What's the purpose of the 'ALT' button above each channel, and how does it impact the input signal?
The 'ALT' button toggles between the front and rear inputs for channels 1-4, allowing quick switching between different sources (e.g., a microphone on the front combo jack and a line-level instrument on the rear TRS input).