Chat with the Roland JX-08 Manual
Get instant answers about your Roland Roland JX-08. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Roland JX-08 Manual
Common Roland JX-08 Questions
How do I sync the JX-08's internal sequencer to an external MIDI clock source like a DAW?
Set the JX-08's System settings (accessible via SHIFT + MENU) to 'MIDI Clock: External' and ensure your DAW is sending MIDI clock signals on the specified MIDI channel; the JX-08 will then follow the DAW's tempo.
How do I save my edited sounds (patches) on the JX-08 so they don't disappear when I turn it off?
Press the MANUAL button, then press the WRITE button; use the VALUE knob to select a memory location (A11-D88) and press WRITE again to confirm saving your current patch.
The sound is very quiet even with the volume knob turned up. What could be the issue?
Check the master volume in the SYSTEM settings, and ensure that the volume level of each individual Tone (Tone 1 and Tone 2) isn't set too low within the Patch settings.
How do I create a pattern using the JX-08's sequencer?
Press the SEQUENCER button to enter sequence mode, then press REC to start recording your sequence; play notes on the keyboard (either the built-in one or an external MIDI keyboard) and press REC again to stop recording; the JX-08 sequencer is 16-steps.
What is the benefit of the JX-08's dual-layer structure and how can I utilize both layers?
The JX-08 has two 'Tones' that can be layered or split, allowing you to create more complex and dynamic sounds by combining two different patches; you can control the levels and panning of each Tone individually to blend them to your liking.