Chat with the Roland JU-06A Manual
Get instant answers about your Roland Roland JU-06A. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Roland JU-06A Manual
Common Roland JU-06A Questions
How do I sync the JU-06A's sequencer to an external MIDI clock source, like a DAW or drum machine?
Set the rear panel 'SYNC MODE' switch to 'MIDI', then configure your external device to send MIDI clock. The JU-06A will follow the incoming tempo and start/stop signals.
How do I save and load my custom patterns on the JU-06A?
Press and hold the 'MANUAL' button, then press a numbered patch button (1-16) to save the current pattern to that location. To load, simply press the desired numbered patch button.
What do the 'ENV' and 'LFO' sections control on the JU-06A and how do they affect the sound?
The 'ENV' (Envelope Generator) section shapes the volume over time, while the 'LFO' (Low Frequency Oscillator) provides modulation for parameters like pitch or filter, adding movement and depth.
Why is there no sound coming from my JU-06A, even though the power is on and the volume is up?
Check that the 'KEYBOARD' switch on the back panel is set to 'ON' if you're using the built-in keyboard, or 'MIDI' if you're using an external MIDI controller. Also, ensure your headphones or speakers are properly connected and functioning.
What's the difference between the JU-06A's Juno-106 mode and the Juno-60 mode, and how do I switch between them?
The JU-06A emulates both the Juno-106 and Juno-60. Switch between modes by holding the 'MANUAL' button and pressing either the '106' or '60' button to select the corresponding emulation.