Chat with the Roland JP-08 Manual
Get instant answers about your Roland Roland JP-08. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Roland JP-08 Manual
Common Roland JP-08 Questions
How do I sync the JP-08's sequencer to an external MIDI clock source like a DAW or drum machine?
Set the JP-08's MIDI clock source to 'External' in the System settings (press MANU and then the '1' button repeatedly until you see the clock source option). Ensure your DAW or drum machine is sending MIDI clock messages on the correct MIDI channel and that the JP-08 is receiving them.
How do I save a custom sound I've created on the JP-08?
Press the MANUAL button to exit manual mode. Then, press and hold the desired memory location (e.g., A1, B4) for a few seconds until the LED blinks, indicating the sound is saved.
The JP-08's knobs are stepping instead of smoothly changing the sound. How do I fix this?
This is likely due to the 'Jump' mode being active. Press the MANUAL button to enter manual mode. In manual mode, the knobs should respond smoothly without stepping.
How do I create a pattern using the JP-08's sequencer?
First, select a memory location. Press the REC button, then play the notes and parameter changes you want to record. Press REC again to stop recording; then press PLAY to hear the pattern.
What is the 'Chain Mode' feature on the JP-08, and how do I use it?
Chain Mode allows you to link two JP-08 units together for increased polyphony. Connect the MIDI Out of the master unit to the MIDI In of the slave unit, then enable Chain Mode on both using the System settings.