Chat with the Focusrite Scarlett 8i6 3rd Gen USB Audio Interface Manual
Get instant answers about your Focusrite Focusrite Scarlett 8i6 3rd Gen USB Audio Interface. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Focusrite Scarlett 8i6 3rd Gen USB Audio Interface Manual
Common Focusrite Scarlett 8i6 3rd Gen USB Audio Interface Questions
How do I connect and configure MIDI devices with the Scarlett 8i6 3rd Gen?
Connect your MIDI devices to the 5-pin MIDI IN and OUT ports on the rear panel. In your DAW, select the 'Scarlett 8i6' as your MIDI input and output device within the MIDI device settings.
Can I save custom input routing configurations or 'presets' in the Scarlett 8i6 3rd Gen?
Yes, you can save custom routing configurations within the Focusrite Control software. Use the 'Save' and 'Load' functions within the software to manage your presets for quick recall.
How do I adjust the input gain for microphones connected to the Scarlett 8i6 3rd Gen?
Use the gain knobs located on the front panel, labeled 'Gain 1' and 'Gain 2', to adjust the input level for each microphone connected to inputs 1 and 2. Watch the halo light around each gain knob - green indicates a good signal, yellow is approaching clipping, and red indicates clipping.
My Scarlett 8i6 3rd Gen is not being recognized by my computer, what should I do?
First, ensure the interface is properly connected via USB and powered on. Then, check that you have the latest Focusrite drivers installed for your operating system from the Focusrite website, and try restarting your computer.
What are the Air mode switches on the Scarlett 8i6 3rd Gen for and when should I use them?
The 'Air' mode switches on inputs 1 and 2 activate an analog emulation of Focusrite's ISA transformer-based preamps. Use them to add a brighter and more open sound to vocals or instruments that benefit from increased high-frequency presence.