Chat with the Focusrite Scarlett 18i20 3rd Gen USB Audio Interface and Preamp Expansion Bundle Manual
Get instant answers about your Focusrite Focusrite Scarlett 18i20 3rd Gen USB Audio Interface and Preamp Expansion Bundle. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Focusrite Scarlett 18i20 3rd Gen USB Audio Interface and Preamp Expansion Bundle Manual
Common Focusrite Scarlett 18i20 3rd Gen USB Audio Interface and Preamp Expansion Bundle Questions
How do I connect and configure MIDI devices with the Scarlett 18i20 3rd Gen?
Connect your MIDI devices to the MIDI In/Out ports on the back of the interface. Then, in your DAW's MIDI settings, select 'Scarlett 18i20 USB' as both the input and output device to enable MIDI communication.
Where are the Mic Preamp controls located, and how do I set the gain for my microphones using the Scarlett 18i20 3rd Gen?
The mic preamp gain controls are the rotary knobs on the front panel for each of the eight XLR/TRS combo inputs; adjust them while monitoring the input level in your DAW to achieve an optimal signal without clipping. The 'Air' feature can be engaged via a dedicated button per channel for added clarity.
I'm getting crackling or popping sounds during recording with the Scarlett 18i20 3rd Gen. What could be causing this?
This is usually caused by buffer size issues; try increasing the buffer size in your DAW's audio settings or updating your audio interface driver to the latest version from the Focusrite website.
Can I use the Scarlett 18i20 3rd Gen as a standalone preamp without connecting it to a computer?
Yes, the Scarlett 18i20 3rd Gen can operate in standalone mode, functioning as an 8-channel preamp connected via ADAT. Refer to the Focusrite Control software manual for setting up standalone mode configurations.
How do I use the ADAT inputs on the Scarlett 18i20 3rd Gen to expand my input channels?
Connect an ADAT-equipped preamp to the ADAT input on the Scarlett 18i20, then configure Focusrite Control to recognize and route the ADAT inputs as additional channels within your DAW.