Chat with the Focusrite RedNet R1 Desktop Remote Controller for Red Interfaces Manual
Get instant answers about your Focusrite Focusrite RedNet R1 Desktop Remote Controller for Red Interfaces. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Focusrite RedNet R1 Desktop Remote Controller for Red Interfaces Manual
Common Focusrite RedNet R1 Desktop Remote Controller for Red Interfaces Questions
How do I control the RedNet R1's monitor level using a MIDI controller?
The RedNet R1 can be controlled via MIDI using the RedNet Control software. Assign MIDI CC messages to control volume, mute, dim, and other functions using the 'MIDI Control' tab within the RedNet Control settings for the R1.
Where are my monitor profiles (presets) saved, and how can I back them up?
Monitor profiles for the RedNet R1 are saved within the RedNet Control software settings on your computer. To back them up, export the RedNet Control configuration file, which contains all your RedNet device settings, including the R1's monitor profiles.
How do I quickly switch between different speaker configurations using the RedNet R1?
You can store and recall different speaker configurations (e.g., stereo, 5.1, Dolby Atmos) as monitor profiles within RedNet Control. Assign these profiles to the R1's user-definable buttons for instant switching between them.
My RedNet R1 is not showing up in RedNet Control. What should I do?
First, ensure the R1 is powered on and connected to the same network as your computer. Check the Ethernet cable connection and verify that RedNet Control is configured to the correct network interface. Finally, restart the R1 and the RedNet Control software.
What is the main benefit of the Dante headphone output on the RedNet R1?
The Dante headphone output allows for low-latency monitoring directly from the Dante network, enabling you to monitor any Dante source on the network without routing through your DAW or other software.