Chat with the Elektron Analog Four MKII Manual
Get instant answers about your Elektron Elektron Analog Four MKII. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Elektron Analog Four MKII Manual
Common Elektron Analog Four MKII Questions
How do I sync the Analog Four MKII to my DAW using MIDI?
Ensure the Analog Four MKII is set to receive MIDI clock (GLOBAL > MIDI CONFIG > SYNC > CLOCK RECEIVE = INT+EXT or EXT) and MIDI transport (GLOBAL > MIDI CONFIG > SYNC > TRANSPORT RECEIVE = ON). Also, configure your DAW to send MIDI clock and start/stop messages to the Analog Four MKII on the correct MIDI channel (GLOBAL > MIDI CONFIG > CHANNEL > MIDI TRACK CH).
What's the difference between a Sound, a Kit, and a Pattern on the Analog Four MKII, and how do I save them?
A Sound is a single oscillator preset, a Kit contains the Sounds and performance settings for all four tracks, and a Pattern holds the sequencer data; Sounds are saved in the Sound Pool, Kits via FUNCTION + KIT, and Patterns via FUNCTION + PATTERN, pressing YES to save your changes to their respective storage locations.
How do I quickly copy a pattern from one bank to another on the Analog Four MKII?
Enter GLOBAL > PROJECT > PATTERN MANAGER, then select the source pattern, press FUNCTION + COPY, then select the destination pattern, and press FUNCTION + PASTE to copy the pattern.
Why is there no sound coming from one of my tracks on the Analog Four MKII?
Check the individual track's volume level (press TRK + the track number, then adjust the LEVEL knob), ensure the track is not muted (hold TRK and press the corresponding track button), and verify that the track is routed correctly in the Routing menu (ROUTING > VOL/PAN > OUTPUT).
How do I use the Performance Macros on the Analog Four MKII for live tweaking?
Assign parameters to the Performance Macro knobs by holding FUNCTION + PERFORMANCE and turning the knob while adjusting the parameter you want to control; then, in performance mode (hold TRK + PLAY), use the PERFORMANCE knobs to manipulate all assigned parameters simultaneously for dynamic changes.