Chat with the Cranborne Audio 500R8 Channel Strip Bundle Manual
Get instant answers about your Cranborne Cranborne Audio 500R8 Channel Strip Bundle. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Cranborne Audio 500R8 Channel Strip Bundle Manual
Common Cranborne Audio 500R8 Channel Strip Bundle Questions
How do I configure the 500R8's MIDI ports to send MIDI Clock and transport controls to my DAW?
In your DAW's MIDI settings, select the Cranborne 500R8 as both a MIDI input and output device. Then, enable MIDI Clock send from your DAW to the 500R8 and enable the 500R8 as the control surface in your DAW's preferences to receive transport controls.
Can I save and recall entire channel strip configurations (EQ, Compression, etc.) as presets within the 500R8 itself, or do I have to rely solely on my DAW?
The Cranborne 500R8 relies on your DAW for saving and recalling channel strip settings. Since it's primarily an analog interface with digital control, the actual module settings are saved as part of your DAW session, not directly within the interface.
What is the basic workflow for routing an external instrument through a 500 series module in the 500R8 and into my DAW for recording?
Connect the instrument to one of the 500R8's analog inputs, insert a 500 series module in the corresponding slot, and then select that analog input as the source for an audio track in your DAW. Ensure the 'Module In' and 'Module Out' switches for that channel are engaged to route the signal through the 500 series module.
My DAW isn't recognizing the 500R8, even though it's connected via USB. What are some troubleshooting steps I can take?
First, ensure the 500R8 is powered on and the USB cable is securely connected. Then, reinstall the latest Cranborne Audio driver from their website and verify it's selected as the audio interface in your DAW's audio settings.
What is the 'Reference Quality Headphone Amplifier' and how do I use it to monitor my mixes?
The 500R8 features a high-quality headphone amplifier on the front panel for accurate monitoring. Connect your headphones, and use the front panel knob to adjust the headphone volume. The headphone source can be routed to the main mix, aux sends, or individual channels via the Cranborne Audio software.