Chat with the Behringer DeepMind 12 Manual
Get instant answers about your Behringer Behringer DeepMind 12. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Behringer DeepMind 12 Manual
Common Behringer DeepMind 12 Questions
How do I sync the DeepMind 12's internal arpeggiator or sequencer to an external MIDI clock source?
Go to the Global settings (Shift + LFO 1 Shape), set 'Clock Source' to 'MIDI', and ensure your external sequencer is sending MIDI clock signals on the selected MIDI channel. You may also need to adjust the 'Clock Div' parameter to match the tempo divisions.
How do I save my custom patches (presets) on the DeepMind 12?
Press the 'Write' button, select the desired bank and patch number using the Value knob or buttons, and then press 'Write' again to confirm; the display will show 'Writing Patch' during the process.
What do the 'Unison' modes do on the DeepMind 12, and how do I use them?
The Unison modes stack multiple oscillators per key for a thicker sound; select the desired mode (Unison 2, 4, 8) and the number of voices using the 'Unison Mode' and 'Unison Detune' parameters in the Voice Mod section, accessible via the 'Edit' button and navigating to that page.
My DeepMind 12 is making strange noises or not responding to MIDI. What can I do?
First, power cycle the unit and check all cable connections; if the problem persists, try performing a factory reset by holding the 'Write' and 'Edit' buttons while powering on the device to restore the original settings, potentially resolving the issue.
How do I create and use the 8-bus effects engine on the DeepMind 12?
Use the 'FX' section buttons to select an effect bus (A-H), then use the Value knob to choose an effect type (e.g., Reverb, Delay); adjust the effect parameters using the dedicated knobs in the FX section, and control the send level for each effect from the mixer section.