Chat with the Audient iD24 10 x 14 USB-C Audio Interface Manual
Get instant answers about your Audient Audient iD24 10 x 14 USB-C Audio Interface. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Audient iD24 10 x 14 USB-C Audio Interface Manual
Common Audient iD24 10 x 14 USB-C Audio Interface Questions
How do I connect and configure a MIDI keyboard or controller to the Audient iD24?
Connect your MIDI device to the iD24's MIDI In and Out ports using standard MIDI cables. The iD24 is class-compliant, so it should be automatically recognized by your DAW; ensure your DAW's MIDI input settings are configured to receive from the 'Audient iD24'.
Can I save custom settings or presets within the iD24's hardware or software mixer for different recording scenarios?
The iD24 itself doesn't store hardware settings, but you can save and load mixer snapshots within the iD software mixer (Audient Mixer) for recall of gain, pan, and routing configurations. These saved snapshots are stored on your computer.
What's the best way to use the Loop-back feature on the iD24 for recording audio from my computer along with a microphone?
Enable Loop-back in the Audient Mixer software; this routes your computer's audio output to a dedicated input channel. Then, in your DAW, select this loopback input alongside your microphone input to simultaneously record both your mic and computer audio.
My computer isn't recognizing the iD24, or I'm getting audio dropouts. What should I do?
First, ensure you're using a compatible USB-C cable and that it's directly connected to a USB-C port on your computer (avoid USB hubs if possible). Then, download and install the latest drivers and firmware for the iD24 from the Audient website.
How does the iD24's 'iD Button' function improve workflow when recording?
The 'iD Button' provides flexible monitor control. By default it controls DIM, ALT, and SUM features, which enables instant attenuation, alternative speaker selection, and mono monitoring for improved mixing decisions while tracking.