Chat with the Teenage engineering TX-6 Manual
Get instant answers about your Teenage Engineering Teenage engineering TX-6. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Teenage engineering TX-6 Manual
Common Teenage engineering TX-6 Questions
How do I configure the TX-6 to send and receive MIDI signals to control external synths or DAWs?
Connect a USB-C cable to your computer or a compatible MIDI device. Use the Config menu (accessed by holding the Config button) to select 'MIDI mode' and configure channel assignments for sending and receiving MIDI CC messages via the TX-6 encoders.
Can I save patterns or presets on the TX-6, and how do I manage them?
The TX-6 offers a sequencer where you can save patterns. Access the sequencer by double-pressing the Config button. Saved patterns are stored internally and recalled via the sequencer interface; there's no specific naming or external save option.
What are the basic steps to route audio through the TX-6 and apply effects?
Connect your audio sources to the TX-6 inputs, adjust the input gain using the corresponding encoders, then use the Config menu to assign the input channels to the stereo output. Apply effects using the encoders by selecting the desired channel via double tapping, then cycling through effect options by pressing Config.
My TX-6 screen is frozen or unresponsive. What should I do?
Try a hard reset by holding the Power and Config buttons simultaneously for several seconds. If that doesn't work, try updating the firmware via the USB connection to your computer, ensuring you download the latest firmware from Teenage Engineering's website.
What is the 'Instrument Mode' and how can I use the TX-6 as a synthesizer?
Instrument Mode turns the TX-6 into a basic synthesizer using the built-in digital oscillators. Access it via the Config menu; then use the encoders to adjust parameters like wave shape, pitch, and filter, which are displayed on the screen.