Chat with the Sequential Circuits Six-Trak Manual
Get instant answers about your Sequential Circuits Sequential Circuits Six-Trak. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Sequential Circuits Six-Trak Manual
Common Sequential Circuits Six-Trak Questions
How do I sync the Six-Trak's sequencer to an external MIDI clock?
Set the Six-Trak to MIDI mode 2 (using the keypad after pressing 'MIDI') to receive external clock; also ensure your sequencer or DAW is sending MIDI clock messages on the selected channel.
How do I save a created sound (preset) on the Six-Trak?
Press 'WRITE', then the number (00-99) corresponding to the memory location where you want to save the sound, then 'ENTER'; the display will blink, indicating the sound is saved.
How do I record a sequence into the Six-Trak's sequencer?
Press 'SEQ REC', then start playing notes on the keyboard; when finished, press 'SEQ REC' again to stop recording and then press 'SEQ PLAY' to play it back.
The Six-Trak is making no sound, even though the power is on. What could be the problem?
First, check the volume knob and the output cable; then, ensure that a patch is loaded into one of the memory locations (00-99) and selected, as the Six-Trak does not have a default initialized sound.
What are 'tracks' on the Six-Trak, and how do I use them in multimode?
The Six-Trak's 'tracks' refer to its six voices; in multimode (accessed by pressing 'MULTI'), each track can be assigned a different MIDI channel, allowing for sequencing of separate parts on a single Six-Trak unit.