Chat with the Roland TR-707 Manual
Get instant answers about your Roland Roland TR-707. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Roland TR-707 Manual
Common Roland TR-707 Questions
How do I sync my TR-707 to other MIDI devices?
Connect a MIDI cable from the MIDI OUT of your master device to the MIDI IN of the TR-707. Set the TR-707's MIDI sync mode to 'External' via the rear panel switch and set the desired MIDI channel, then start the master device to trigger the 707.
How do I save my custom drum patterns on the TR-707?
After creating a pattern, press the 'WRITE' button, then the desired pattern number (1-16 for tracks A and B). The 707 does not have save slots beyond its onboard memory, so back up your work by recording the output.
How do I create a song using the TR-707's sequencer?
Press the 'SONG' button, select a song number (1-8), and then enter the pattern numbers in the order you want them played, using the numeric buttons. Press START/STOP to begin playback.
My TR-707 isn't triggering correctly when receiving MIDI clock. What could be wrong?
Ensure the rear panel 'MIDI Mode' switch is set to 'External' and that the incoming MIDI clock signal is stable. Also, double-check the MIDI channel assignment matches the sending device.
What is the 'Flam' function on the TR-707 and how do I use it?
The 'Flam' function allows you to create a short delay between two consecutive notes, giving a flanged effect. Press the 'INST' button, select an instrument, then adjust the 'FLAM' knob to control the delay time before entering notes in write mode.