Chat with the Roland SYSTEM-8 Manual
Get instant answers about your Roland Roland SYSTEM-8. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Roland SYSTEM-8 Manual
Common Roland SYSTEM-8 Questions
How do I sync the SYSTEM-8's internal sequencer to an external MIDI clock, like from my DAW?
In the SYSTEM-8's System settings (accessed by holding the Menu button), set 'MIDI Clock' to 'External'. Make sure your DAW is sending MIDI clock on the correct MIDI channel set on the SYSTEM-8.
Where are my saved patches/tones stored, and how can I back them up?
Tones are stored internally within the SYSTEM-8's memory (Banks A-H). You can back up all patches via USB to your computer using Roland's SYSTEM-8 driver and a MIDI librarian/editor software.
How do I activate the 'PLUG-OUT' feature and load a software synthesizer onto the SYSTEM-8?
First, install a compatible Roland PLUG-OUT synthesizer on your computer. Then, connect the SYSTEM-8 via USB and use the Roland Cloud Manager software to transfer and activate the PLUG-OUT onto the SYSTEM-8.
My SYSTEM-8's display is frozen or behaving erratically, what should I do?
Try performing a power cycle: turn the SYSTEM-8 off, wait a few seconds, and then turn it back on. If the problem persists, consider performing a factory reset (refer to the SYSTEM-8 manual for the procedure), but be aware this will erase all your saved data.
What does the 'ACB' technology on the SYSTEM-8 actually do?
ACB (Analog Circuit Behavior) is Roland's proprietary technology that recreates the behavior and sonic characteristics of classic analog synthesizers digitally, giving the SYSTEM-8 the ability to authentically emulate instruments like the JUNO-106 and JUPITER-8 via PLUG-OUTs.