Chat with the Roland MC-202 Manual
Get instant answers about your Roland Roland MC-202. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Roland MC-202 Manual
Common Roland MC-202 Questions
How do I sync the MC-202 to other MIDI gear?
The MC-202 is MIDI Out only. Connect its MIDI Out to the MIDI In of the device you want to control and set the receiving device to the same MIDI channel that the MC-202 is transmitting on (set via the back panel switch).
How do I save patterns or compositions on the MC-202?
The MC-202 has no save function in the modern sense. You must manually record patterns and then input them into memory via the sequencer controls; there is no ability to save to external storage.
What's the best way to create a simple bassline on the MC-202?
Start by setting the Mode switch to 'COMP' and entering note values and gate times using the numeric keypad. Then, use the 'Pitch' and 'Gate Time' knobs to fine-tune the sound.
Why is my MC-202 not playing the correct notes, or skipping steps?
This is often due to dirty slider potentiometers or poor battery contact. Clean the sliders with contact cleaner and ensure a fresh battery is properly installed and making good contact.
What does the 'Accent' function on the MC-202 actually do?
The Accent function increases the volume and brightness of the notes that are programmed with an accent. This helps add rhythmic variation and emphasis to your sequences.