Chat with the RetroKits RK-008 Manual
Get instant answers about your RetroKits RetroKits RK-008. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with RetroKits RK-008 Manual
Common RetroKits RK-008 Questions
How do I sync the RK-008's sequencer to an external MIDI clock source like a drum machine or DAW?
Navigate to the RK-008's global settings menu using the button combination and select 'Clock Source' to 'External'. Ensure your external device is sending MIDI clock on the appropriate MIDI channel, which you can also configure in the global settings.
Where are the recorded MIDI patterns and instrument kits stored, and how do I back them up?
The RK-008 stores patterns and kits internally; there's no removable storage. Connect the RK-008 to your computer via USB and use the RK-008 Manager software (available on the RetroKits website) to back up and restore your data.
How do I quickly clear a recorded MIDI sequence in the RK-008 to start a new pattern?
While in Record mode, press and hold the 'Record' button and simultaneously press the 'Clear' button. This will erase the currently selected pattern, allowing you to record a new one from scratch.
My RK-008 seems unresponsive and isn't sending or receiving MIDI signals. What should I do?
First, double-check all MIDI cable connections. If using USB MIDI, ensure the correct driver is installed (if necessary) and the RK-008 is recognized by your computer. Try resetting the RK-008 to factory settings (consult the manual for the button combination) as a last resort.
What is the 'Multi-Program' feature of the RK-008, and how can I use it to switch between different instrument sounds on my connected synthesizers?
The 'Multi-Program' feature allows you to chain Program Change messages across multiple MIDI channels. Configure which MIDI channels and program change numbers are associated with each step in your sequence, effectively changing multiple synth sounds with a single button press.