Chat with the IK Multimedia iRig Pre 2 Manual
Get instant answers about your IK Multimedia IK Multimedia iRig Pre 2. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with IK Multimedia iRig Pre 2 Manual
Common IK Multimedia iRig Pre 2 Questions
How do I connect my condenser microphone to the iRig Pre 2 and ensure it's receiving phantom power?
Connect your XLR microphone to the iRig Pre 2's XLR input and then slide the +48V switch on the side to the 'on' position to enable phantom power. Ensure your batteries are fresh, as phantom power drains them faster.
My microphone signal is very weak even with the gain knob turned up. What could be the problem?
First, ensure the +48V phantom power is engaged if using a condenser mic. Second, try increasing the gain further, making sure to monitor your input levels to avoid clipping. Lastly, check the battery level in the iRig Pre 2; a low battery can reduce the available gain.
Does the iRig Pre 2 have any onboard MIDI capabilities or connectivity?
No, the iRig Pre 2 is a microphone preamplifier and does not feature any MIDI connectivity or functionality.
Can I use the iRig Pre 2 with my Android device, and are there any specific settings I need to adjust?
Yes, the iRig Pre 2 is compatible with Android devices. You might need a TRRS to TRS adapter depending on your device's headphone jack configuration, and you should adjust the input level in your recording app to prevent clipping.
What is the 'direct monitor' switch for on the iRig Pre 2 and when should I use it?
The 'direct monitor' switch allows you to hear your microphone input directly through your headphones with zero latency, bypassing your recording app's processing. Use it when you want to monitor your voice in real-time while recording to avoid any delay.