Chat with the Behringer Crave Manual
Get instant answers about your Behringer Behringer Crave. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with Behringer Crave Manual
Common Behringer Crave Questions
How do I sync the Crave's sequencer to an external MIDI clock source like a DAW?
Connect the MIDI output of your DAW to the Crave's MIDI input. Then, set the Crave's tempo to external sync by holding the 'REC' button and pressing the 'PLAY' button until the Tempo LED blinks slowly (external clock).
Can I save patterns I create on the Crave? If so, how?
The Crave does not have internal memory for saving patterns. You must record sequences in real-time into an external sequencer or DAW via MIDI or control voltage.
How do I transpose the sequence while it's playing?
You can transpose the sequence in real-time by connecting a keyboard to the Crave's MIDI input and playing notes while the sequence is running. The Crave will transpose the sequence based on the note played.
My Crave isn't making any sound, but all the lights are on. What could be the problem?
First, ensure the volume knob is turned up and the 'GATE' light is illuminated indicating the sequencer is active. Also, check that the VCA mode switch is set to 'EG' for envelope-controlled volume or 'ON' for constant volume, and that the cutoff frequency is set high enough to hear sound.
What is the purpose of the 'Utility' output and how can I use it?
The 'Utility' output provides a gate signal derived from the sequencer's active step and can be used to trigger other modules or effects. It can also be used as a clock divider based on sequence length for complex time-based modulations.