Chat with the AlphaTheta Omnis-Duo 2-deck Portable DJ System Manual
Get instant answers about your AlphaTheta AlphaTheta Omnis-Duo 2-deck Portable DJ System. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with AlphaTheta Omnis-Duo 2-deck Portable DJ System Manual
Common AlphaTheta Omnis-Duo 2-deck Portable DJ System Questions
How do I map the Omnis-Duo's controls to a different DJ software via MIDI?
The Omnis-Duo is MIDI-compliant, but not natively supported by all software. Check your DJ software's manual for instructions on manual MIDI mapping, assigning functions within the software's MIDI settings to the Omnis-Duo's knobs, faders, and buttons.
Can I save patterns or loop settings within the Omnis-Duo for later use, and if so, how?
The Omnis-Duo itself does not save patterns or custom loop points internally. Loop points can be saved per song within your DJ software but rely on the software's functionalities, not the controller itself.
The audio output on one side of the Omnis-Duo is cutting out intermittently. What should I check?
First, ensure the volume knob for that channel is properly adjusted and not fully muted. If the problem persists, check your RCA and master output connections, and make sure the headphone mix balance isn't skewed to one side.
How do I use the Bluetooth input to play music through the Omnis-Duo, and are there any limitations?
Activate Bluetooth pairing on the Omnis-Duo by holding down the 'Bluetooth' button on the top panel, then connect your device; be aware that Bluetooth audio introduces some latency, so it's not suitable for precise mixing or scratching.
Does the Omnis-Duo have any built-in effects, and how do I access and control them?
The Omnis-Duo has Beat FX and Sound Color FX built-in, selected and adjusted using the dedicated knobs above each deck and activated through the 'FX On/Off' buttons; refer to the manual for the full list of available effects.