Chat with the AKAI MPC60II Manual
Get instant answers about your AKAI AKAI MPC60II. Ask questions like "how do I set up MIDI?" or "how do I save patterns?"
📖Chatting with AKAI MPC60II Manual
Common AKAI MPC60II Questions
How do I sync the MPC60II to other MIDI devices like a sequencer or drum machine?
Configure the MPC60II as either MIDI master or slave via the 'MIDI SYNC' parameter in the 'MIDI' menu. Select the correct MIDI clock input and output ports to ensure proper synchronization.
How do I save my patterns, songs, and sound programs (kits) on the MPC60II?
Use the 'SAVE' function from the main menu to save your sequences, songs, and program data to a floppy disk. Always verify that the floppy is formatted correctly before saving.
What's the basic workflow for creating a beat on the MPC60II?
First, load or sample sounds into memory, then assign them to pads. Next, enter record mode to record your beat, utilizing the sequencer to create patterns and chain them into songs.
My MPC60II isn't triggering sounds or seems to be 'stuck'. What could be the problem?
Check the pad sensitivity settings under the 'PAD' menu, and verify that the pads are clean and making proper contact. Also, ensure no MIDI notes are being continuously sent to the MPC, locking up the unit.
What is the RAM limitation of the MPC60II and how does this affect sampling time?
The MPC60II has a maximum RAM capacity of 768KB, which translates to roughly 13.1 seconds of sampling time at its native 40 kHz sampling rate; consider this limitation when planning sample lengths.